HFBR-4516 Duplex Plastic Fiber Optic Connector (4516 HFBR- 4516Z Duplex OR POF Connector)
Compatible with Agilent Versatile Link Family of Connectors and Fiber Optic Components 1 mm Diameter Plastic Optical Fiber (POF) in Two Grades: Low Cost Standard POF with 0.22 dB/m Typical Attenuation, or High Performance Extra Low Loss POF with 0.19 dB/m Typical Attenuation
The HFBR-R/EXXYYY series of plastic fiber optic cables are constructed of a single step-index fiber sheathed in a black polyethylene jacket. The duplex fiber consists of two simplex fibers joined with a zipcord web. Standard attenuation and extra low loss POF cables are identical except for attenuation specifications. Polyethylene jackets on all plastic fiber cables comply with UL VW-1 flame retardant specification (UL file # E89328). Cables are available in unconnectored or connectored options. Refer to the Ordering Guide for part number information.
Applications
Industrial Data Links for Factory Automation and Plant Control Intra-System Links; Boardto-Board, Rack-to-Rack Telecommunications Switching Systems Computer-to-Peripheral Data Links, PC Bus Extension Proprietary LANs Digitized Video Medical Instruments Reduction of Lightning and Voltage Transient Susceptibility High Voltage Isolation
Absolute Maximum Ratings Parameter Storage and Operating Temperature Recommended Operating Temperature Installation Temperature Short Term Tensile Single Channel Force Dual Channel Short Term Bend Radius Long Term Bend Radius Long Term Tensile Load Flexing Symbol TS,O r FT Min. -40 -20 Max. Unit mm N Cycles Note
Mechanical/Optical Characteristics, to +85°C unless otherwise specified. Parameter Cable Standard Cable, Attenuation Type “R” Extra Low Loss, Type “E” Reference Standard Cable, Attenuation Type “R” Extra Low Loss, Type “E” Numerical Aperture Diameter, Core and Cladding Diameter, Jacket Propagation Delay Constant Mass per Unit Length/Channel Cable Leakage Current Refractive Index Core Cladding Symbol O Min. DC DJ l/v 2.13 Typ.[5] Max. dB/m Unit dB/m Condition Source (660 mm LED, 0.5 NA) = 50 meters Source is 650 nm, 0.5 NA monochrometer, = 50 meters Note 7, Figure 1 >2 meters Simplex Cable Note 6 Without Connectors 50 kV, = 0.3 meters
Notes: 1. Installation temperature is the range over which the cable can be bent and pulled without damage. Below -20°C the cable becomes brittle and should not be subjected to mechanical stress. 2. Short Term Tensile Force is for less than 30 minutes. 3. Short Term Bend Radius is for less than 1 hour nonoperating. 4. 90° bend 25 mm radius mandrel. Bend radius is the radius of the mandrel around which the cable is bent. 5. Typical data are 25°C. 6. Propagation delay constant is the reciprocal of the group velocity for propagation delay of optical power. Group velocity is v=c/n where c is the velocity of light in free space (3xl08 m/s) and n is the effective core index of refraction. 7. Note that R rises at the rate of about 0.0067 dB/ °C, where the thermal rise refers to the LED temperature changes above 25°C. Please refer to Figure 1 which shows the typical plastic optical fiber attenuation versus wavelength at 25°C.
Connector Description Four connector styles are available for termination of plastic optical fiber: simplex, simplex latching, duplex and duplex latching. All connectors provide a snap-in action when mated to Versatile Link components. Simplex connectors are color coded to facilitate identification of transmitter and receiver connections. Duplex connectors are keyed so that proper orientation is ensured during insertion. If the POF cable/ connector will be used at extreme operating temperatures or experience frequent and wide temperature cycling effects, the cable/connector attachment can be strengthened with an RTV adhesive (see Plastic Connectoring Instructions for more detail). The connectors are made of a flame retardant VALOX UL94 V-0 material (UL file # E121562).
The simplex latching connector is designed for rugged applications requiring a greater retention force 80 Newtons ( 18 lb.) than provided by a simplex nonlatching connector. When inserting the simplex latching connector into a module, the connector latch mechanism should be aligned with the top surface of the horizontal modules, or with the tall vertical side of the vertical modules. Misalignment of an inserted latching connector into either module will not result in a positive latch. The connector is released by depressing the rear section of the connector lever, and then pulling the connector assembly away from the module housing. The simplex latching connector is available in gray (HFBR-4503) or blue (HFBR-4513).
The duplex latching connector is designed for rugged applications requiring greater retention force than the nonlatching duplex connector. When inserting the duplex latching connector into a module, the connector latch mechanism should be aligned with the top surface of the dual combination of horizontal or vertical Versatile Link components. The duplex latching connector is available in gray (HFBR-4516).
The simplex connector provides a quick and stable connection for applications that require a component-to-connector retention force of 8 Newtons (1.8 lb.). These connectors are available in gray (HFBR-4501) or blue (HFBR-4511).
Duplex connectors provide convenient duplex cable termination and are keyed to prevent incorrect insertion into duplex configured modules. The duplex connector is compatible with dual combinations of horizontal or vertical Versatile Link components (e.g., two horizontal transmitters, two vertical receivers, a horizontal transmitter with a horizontal receiver, etc.). The duplex non-
The HFBR-4505/4515 adapter mates two simplex connectors for panel/bulkhead feedthrough of HFBR-4501/4511 terminated plastic fiber cable. Maximum panel thickness mm (0.16 inch). This adapter can serve as a cable in-line splice using two simplex connectors. The adapters are available in gray (HFBR4505) and blue (HFBR-4515). This adapter is not compatible with POF duplex, POF simplex latching, or HCS connectors.
General specifications4516 duplex plastic fiber optic connector( 4516 HFBR- 4516Z Duplex OR POF Connector ) |
|
Connector type: | Plastic fiber optic connector |
Connector code: | 4516 HFBR-4516 Duplex OR POF Connector |
Core diameter: | 1.0 mm |
Main ingredients: | PMMA |
Overall diameter: | 2.2mm |
Wavelength of plastic fiber optics: | 650 or 530 nm |
Weakening : | <180dB/km |
radius: | 5x core diameter Numerical |
diaphragm | 0.5 |
Incident angle: | 60° |
Connection loss: | <0.5dB |
Tensile strength : | 1.0dB (0 to 80N) |
Vibration: | 1.0dB (5 to 50 Hz, range 1.5 mm) |
Operating temperature: | -40℃-+75℃ |
Storage temperature: | -40℃-+75℃ |
Standard : | CE و REACH |
Reviews
There are no reviews yet.