فارسی
network keystone CAT5e UTP 90 degree
CAT5e Keystone Jacks from Networx(tm) provide the ultimate performance at a competitive price. Whether they are being used in a home network installation or being pushed to the limits by the largest data hungry applications out there; these Keystone Jacks will live up to the expectations time and time again. The Phosphor Bronze termination contacts will stand up to multiple punches while the Keystone Jacks as a whole meet or exceed the industry standard TIA/EIA 568-B. Color coding and quick identification just got a whole lot easier. Thanks to the multiple colors available from Networx(tm) organization will no longer require time consuming labeling, simply set up your color scheme and you are on your way to organizational bliss. Labeled with both 568-A and 568-B color codes there will be no more memorizing color codes; simply match the colors and punch down. Networx(tm) Category 5e Keystone Jacks are 8-Position 8-Conductor (8P8C) and use the same 110 Punch Down style that most patch panels use; no switching blades when jumping from keystone jacks to patch panels. Get the most out of your network with Networx(tm) CAT5e Keystone Jacks.
network keystone CAT5e UTP 90 degree
1. Technique Characteristics
• Material of plastic parts: PC UL94V-0
• Standard 110 punching tool, compatible with T568A/T568B
• According to the standard of ISO/IEC 11801 & TIA/EIA 568-B.2 Cat.5e
• Golden plated Pins, IDC clips and internal PCB board match well and provide best performance
• Whole Pin nickel plated with connect pins golden plated 6μ prevent oxidation, lasting the service life
• IDC clips: Tinned phosphor bronze nickel plated with dependability 250 times
• Termination caps prevent dust and wire from dropping off
• Slim design makes it matched with prevailing blank patch panel
2. Electrical Characteristics
• DC Resistance: ≤300mΩ
• Contact Resistance: ≤20mΩ
• Dielectric strength: 1000V(AC750V)1min no break down and flashover
• Insulation Resistance: ≥1000MΩ
3. Physical Characteristics
• Phosphor bronze with nickel plated , connector pins with golden plated
• IDC clip: Tinned phosphor bronze pins with nickel plated, fitting for 22-26AWG cables
• Inserting Duration: ≥750 times
• Punching Duration: ≥250 times
• Termination caps material UL94V -0
• Working temperature: -25ºC~60ºC
4. Standards
• ISO/IEC11801
• TIA/EIA-568B.2-1
• EN50173
•UL 94V-0
5. Application
• Structured cabling transmitting data ,voice, video
• Applied for Cat.6 and E Classes
• Suitable for working area, central room, managing room, equipment room and subsystem applications
Reviews
There are no reviews yet.