FTTH Drop Cable 2 Core

2 Core FTTH Drop Cable Self-Support GJYXFCH SM 9/125 OS2 G657A2 with 2 FRP in Parallel As Strength member A steel wire or KFRP As Strength member LSZH. FRP With Two parallel Fiber Reinforce Plastic (FRP) strength members with LSZH sheath and 1 or 2 or 4 or… Optical fiber unit is positioned in the center A steel wire or KFRP As Strength member. FTTH out door cable because of Fiber Type Singlemode G.657A has a much greater bandwidth to carry data and less susceptible to interference than common indoor fiber cables because flexibility of Singlemode G.657A1 bendable characteristics. With small diameter, water-resistant, the non-metallic strength member FRP (Fiber-reinforced plastic) can provide lightning protection and anti-electromagnetic interference. 2 Core FTTH Drop Cable Self-Support GJYXFCH SM 9/125 OS2 G657A2 with 2 FRP in Parallel As Strength member A steel wire or KFRP As Strength member LSZH is ideal for outdoor cabling, end users directly cabling, and access network.  The optical fiber unit is positioned in the center. Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides. Then, the cable is completed with a black or white LSZH sheath.

FTTH Drop Cable 2 Core

1. Special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property.
2. Two parallel FRP strength members ensure good performance of crush resistance to protect the fiber.
3. Single steel wire as the additional strength member ensure good performance of tensile strength.
4. Simple structure, light weight and high practicability.
5. Novel flute design. easily strip and splice, simplify the installation and maintenance.
6. Low smoke, zero halogen and flame retardant sheath.

1)on fiber type G652D or G657A,Pls note that drop cable usually using G657A Fiber, because G657A Fiber have more small bending radius than G652D,Even both type fiber have same grade attenuation. But Drop cable using for FTTX project, and this project require some point with very small bending radius. If you using G652D will cause too big attenuation or fiber will broke if you bend too small radius .please understand it is very important on this issue.

Related Post...

Fiber Optic Pigtail: What Is It and How to Splice It

Fiber Optic Pigtail In fiber optic cable installation, how cables are attached to the system is vital to the success of network. If done properly, optical signals would pass through the link with low attenuation and little [...]

24
فروردین

How to Know if You Need a New Modem

Need a New Modem Electronic devices that run more often and have a heavier thermal load tend to degrade faster than others. Modems fall into this category. Need a New [...]

09
خرداد

Blog