DSX-PLA804S permanent test CAT8 adapter

The fluke test is one of the tests to measure the correctness of the links and evaluate the faults and defects related to cabling and network connections by the fluke device. Carrying out this test provides technicians with complete information about the network cable and fiber optic cable and nodes, including keystones and other network equipment. .Among the equipment related to the Fluke DSX-8000 tester, we can refer to the DSX-PLA804S permanent test CAT8 adapter, which is used to take the permanent test of the network.

DSX-PLA804S permanent test CAT8 adapter Fluke permanent test

This type of test is more complete and realistic than the previous test. Because in this test, instead of the device modules, the network keystone is used to connect the network cables to the Fluke tester. As you know, in practice, network cables are connected to other equipment using keystones, so the permanent test is a more realistic and reliable test.

Measurable area with fluke test device

The amount of standard length considered for this type of test, both in channel mode and in permanent mode, is about 90 meters of cable. But the important thing is that this fluke test can be checked for different measurements and many parameters can be checked, but as we said, the standard measurement in this test is 90 meters.

The superiority of the permanent test to the channel test

As we mentioned above, the permanent test is more real and reliable than the channel test. Because the channel test is performed in ideal conditions (with the device fabric module), but the permanent test is performed in more realistic conditions (with the network keystone).

A cable that passes the permanent test must also pass the channel test, but it may not work the other way around. This means that almost most cables pass the channel test.

For more information, you can refer to the article What is fluke test? refer to

DSX-PLA804S permanent test CAT8 adapter

Tech Specs