MTP/MPO Type-B Cables
MTP/MPO cables have multi-core connectors that provide more consistent and reliable performance when used in high-density, low-loss cabling, thus becoming an integral part of 40G/100G data transmission in large data centers. Hence, TIA standards define three types of polarized MTP cables: Type A, Type B, and Type C. Different types of MTP polarity cables may have different applications. In this tutorial, we will mainly introduce type-B polarity MTP cables and their applications. For a complete polarity guide of FS MTP cables, you can refer to the white paper Understanding Fiber Polarity.
MTP/MPO Type-B Cable Overview
The type-B polarity MTP cable meaning is to use a key-up connector on both ends of the cable. Often referred to as a 40G MTP cable, the type-B MTP cable is extremely versatile. This cable assembly can be used to plug directly between your 40G QSFP+ optic transceivers. As you can see in the diagram, this cable has a “flipped” polarity and will result in a Pin 1 to Pin 12 relationship. This is extremely useful because 40G optics utilize parallel optics, meaning instead of alternating Tx and Rx in a duplex pattern, the port will look like the following diagram.
MTP/MPO Type-B Cable Categories
Based on its different functions, MTP type-B cable can be divided into two main categories: MTP Trunk cables and MTP-LC breakout cables. Depending on the nature of the socket MTP trunk cables are further divided into female-female, female-male, and male-male. When connecting two 40G SR4 QSFP+ transceivers in parallel optics, only female-female type B MTP cables should be used. For MTP-LC breakout cables, female MTP-LC breakout cables and male MTP-LC breakout cables are available.
Note: MTP connectors can be divided into female connector and male connector. Female connector does not have guide pins, while male connector has two guide pins. The connections between the connectors are precisely aligned with the pin, and the two MTP connectors connected to each other must be male and female.
MTP/MPO Type-B Cable Applications
Due to the special construction of MTP type-B cable, a female connector MTP cable is usually needed to match the male connector MTP cable. The male guide pin fits into the female bore to ensure precise fiber alignment. Attempting to mate two female or male connectors can result in light loss or damage to the fiber splice. The following examples focus on the application of female MTP type-B cables.
40G-40G Direct Connection: Female to Female MTP/MPO Type-B Polarity Trunk Cable
Except for the parallel 40G optical transmission mentioned above, female to female type-B trunk cable also can be used for direct switch to switch connectivity with no patch panels. The following figure shows two Cisco 40G switches connected by a 12-fiber MTP female cable directly.
40G-4x10G Direct Connection: Female MTP to LC Type-B Polarity MTP Breakout Cables
How to connect a 40G switch to a 10G switch? A female MTP-4xLC type-B breakout cable can solve this problem easily. The following figure shows the four 10GBASE-SR transceivers interconnect with one 40GBASE-SR4 transceiver by one female MTP-4xLC breakout cable directly.
40G-40G Interconnections: Type-B MTP/MPO Trunk Cables and Type-B MTP Breakout Cables
Type-B MTP trunk cable and breakout cable can be used together to achieve high performance fiber networking. Figure 5 shows the interconnect of 10GBASE-LR SFP+ transceivers connected by type-B MTP trunk cable and breakout cable. It is an ideal solution for connecting two 40G Cisco switches in a data center by completing the direct connection of MTP fibers through fiber optic panels, simplifying cabling, and performing high-speed fiber optic transmission.
Source: community.fs
Related products...
fiber-optic-cable
LS fiber optic cable 24 core (1*24), multimode, MM 50، Armored
fiber-optic-cable
fiber-optic-cable
[ratings]