SC-SC /APC single mode fiber optic patch cord

Fiber optic patch cable is also known as SC-SC /APC fiber optic patch cord. As an important component, commonly used in fiber optic networks, high quality patch cord is essential for any high performance fiber optic network. Fiber Optic Bank is an extensive line of SC/APC to SC/APC 9.125 micron patch cords, It offers OS2 and single mode in different sizes, jacket materials and cable diameters. The connectors use an APC (Angled Physical Contact) polish, which has higher efficiency than single-mode UPC (Ultra Physical Contact) connectors. APC single-mode fiber optic cables are commonly used in carrier equipment, telecommunications and CATV applications. They are manufactured using high quality materials and are thoroughly tested to ensure superior performance and quality, ideal for fiber cabling infrastructure.

SC-SC /APC single mode fiber optic patch cord

. Among the important and prominent features of this product, the following can be mentioned:

Connector type: SC-SC
Number of fibers: duplex
Wavelength: 1310/1550nm
Loss rate: ≤0.3dB
Cable jacket material: PVC
Polarity: A(Tx) to B(Rx)
Polish type: APC
Fiber type: single mode
Distance in 1 gigabit Ethernet: 1310m at 1550nm
Loss return rate: ≥30dB
Minimum bending radius: 7.5mm
Attenuation rate at 1300 nm: 1.0 dB/km
Cable diameter: 2.0mm
Operating temperature: -20~70°C
Product Highlights

Now, here are some important and outstanding points of the product:

Smart and reliable – flexible optical fiber

Duplex fiber connector according to EIA / TIA 604-2 standard with ceramic ferrule for networks involved in high-speed cabling.

Fiber optic cable structure insensitive to bending

A unique refractive chip with a low refractive index glass layer in the BIF, which reduces light scattering during twisting and bending, ensures stable and fast network transmission.

High quality fiber optic cable guarantee

Comprehensive performance testing ensures that the cable is more secure and data transmission in the network is more reliable and stable.

 

Specific design in mind.

Return loss refers to the ratio in decibels of the ratio of backward reflected light (scattered light transmitted continuously at the input end) to input light at the fiber connection.

The end face is ground at an 8 degree angle to further reduce return loss.

Thanks to the specific design, the head return loss is less than -60dB, of which the insertion loss is also very reliable (≤0.2dB)

 

Soft Peel and LSZH sheathing

Your SC/APC fiber optic cable is protected by LSZH materials. they are insulated with polyethylene, PVC or polyurethane. During a fire, chlorinated plastic releases hydrogen chloride, a toxic gas that forms hydrochloric acid when it comes into contact with water. Halogen-free cables do not produce dangerous gas or acid combinations or toxic smoke when exposed to flame.

Inside, we added a polymer coating with a thickness of 25 μm. The coating layer not only effectively isolates moisture or corrosive liquid, but also has the greatest effect of improving the strength of the optical fiber, and the performance of bending strength, tensile strength and toughness to pressure are greatly improved.

 

Bending and corner solutions

We did a bending test to make sure the protection can work well in some undesirable scenarios.

The minimum radius diameter in the corners is 5mm (generally 10mm -20mm) and the Dynamic Fatigue Parameter (Nd) reaches 26 (20 for general fiber)